Verification of welding


The spreadsheet verifies many welding connections using standard technical literature and Eurocode norms. For some welding cases the italian NTC 2008 norm is also considered, considering the equivalent Eurocode method with stresses calculated on the overturned throat section.

 

The aim is to offer a design tool both for fast and detailed calculation of a welded joint in many typical configurations that they can be found in the practice.

The spreadsheet is divided into different sections, described hereafter:

 

- Full penetration welding

This section reports the general condition for full penetration welding case (butt weld) as per Eurocode norms EN 1993 1-8.

 

- General welding dimensioning

This section reports the verification of fillet welding as per Eurocode norms EN 1993 1-8 considering the general formula and knowing the stress status.

 

- Welding with T, M and N

This section reports some fillet welding cases of plates subjected to general forces of shear T, bending M and tension N.

Both verifications with stresses on the throat and overturned throat section are reported. 

 

- Welding in tension and shear

This section reports some fillet welding cases of plates subjected to shear and tension forces.

 

- Welding in tension

This section reports some fillet welding cases of plates subjected to tension force.

 

- Welding at shear

This section reports some fillet welding cases of plates subjected to shear forces.

 

- Welding verification 1, 2, 3, 4, 5 and 6

Six sections are reported considering some common fillet welding joints for a total number of 13 investigated cases.

 

Pipe Butt Weld verification

 

Head to head piping welding verification to different loads condition.

 

 

- Plug Weld verification

Standard and slotted holes plug welds verification.

 

A total number of 27 investigated cases are reported and verified in the spreadsheet.

 

See video.

 

 

The spreadsheet you will purchase and receive is an excel file compiled in a “.EXE” application file format identified by our icon image. See the Activation/Support page for more details.


Trial version


You can download a trial version of this spreadsheet for evaluation purpose. Click below to download the zipped file.

The trial version has a limited number of runs from its first activation on your computer, after that it stops to work and a new activation key is needed or the full version should be purchased.

To activate it, unzip the downloaded file, run the application and insert the Activation Key you will find in the .TXT file.

After key validation, the runs count starts on your machine and a window is displayed at each launch reminding you the remained launches. 

To purchase the full version go back to this webpage or use the “Purchase Online” button on the window.

 

The trial spreadsheet is fully working with the following limitations:

  • Expiration after a number of runs
  • It is not possible to open/save external spreadsheets when it runs
  • Excel toolbar is not visible
  • Print function is disable
  • Copy and paste functions are disable
  • Save function is disable

 What you will find in the full version

  • No expiration
  • It is possible to open/save external spreadsheets when it runs
  • Excel toolbar is visible
  • Print function is available
  • Save function is available
  • Copy and paste functions are available

For support and questions contact us.

 

Download
Welding Verification v 2.0 - Trial version
Welding Verification v 2.0 - Trial versi
Compressed Archive in ZIP Format 16.5 MB


 

Spreadsheet versions list:

 

Version 2.0

Added Pipe Butt Weld verification sheet.

Added Plug Weld verification sheet.

General restyling of all the verification sheets.

 

Version 1.3

New .EXE file format for the spreadsheet. When launching the .EXE file, Excel is started and the protected workbook is opened as if you had opened it in the regular way. See Activation/Support page for more information.

 

Version 1.2:

Minor corrections.

 

Version 1.1:

Intoduced the possibility to insert user values for the characteristic of the materials.

 

Version 1.0: new introduced file.

 

Comments: 0